Hydraulic feed wood chipper WM-8H
Europe, America and International Patents Pending
- Strength in design, CNC plasma cut structural plate steel
- 19 hp. min. required
- 3-pt. hitch mount - fits category 1 or category 2 (also cat-1 quick hitch)
- 8" x 8" Infeed opening
- 200 lb. 24" Diameter Flywheel (dynamically balanced)
- Two (2) Reversible fly wheel knives, 1 bed knife (anvil)
- 1120 RPM Flywheel speed
- Hydraulic powered infeed system w/dual counter rotating motors
- Self-contained hydraulic system (no hydraulics required from tractor)
- Variable infeed speed 10-75 ft. /min.
- Nylon protected hydraulic hose wrap
- JIC standard hose fittings
- Hardened 6.25" dia. chisel type infeed roller
- Quick hitch compatible (category 1 quick hitch only)
- 360 Degree swivel discharge chute
- Automatic hydro pump belt tensioner
- High flow chamber ventilation - 2" diameter main shaft
- Three (3) Heavy duty cast steel main shaft bearings
- Adjustable infeed roller down pressure
- Weight 990 lbs. (shipping) steel shipping crate L=46" x W=36" x H=48"
- 8mm thick steel fly wheel housing
- Easy access fly wheel knife panels
- Adjustable bed knife (to achieve proper knife gap)
- Five (5) Heavy duty drive belts
- Safety stop bar w/reverse
- Horizontal "table height" infeed hopper for easy loading
- Baked on powder coat finish
- Clear vinyl chip baffle
- PTO shaft included (shear bolt protected) (optional Premium shaft available)
- Colors available; Yellow, Orange, etc.
- 1 yr. parts warranty
- 90% assembled upon delivery
Photos
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.